SEALANT AGAINST ALKALINITY

SEALANT AGAINST ALKALINITY

The sealer against alkali is suitable for areas with presence of alkalinity i.e., moderate with one pH not greater than 10, is a formulated development to promote the adherence of the final finish on the surface as well as improve the performance of the painting since this perfectly sealed surface porosity avoiding detachment and blistering of the finish.

  • Resistant to alkalinity and efflorescence in pH from 8 to 10
  • Water soluble
  • Indoor /exterior
  • Promotes the adhesion of finish
  • Excellent brushability

 

This product to seal the pore, promote adhesion, resist the alkalinity and efflorescence in one pH no higher than 10, can be used on walls of plaster, cement and brick indoors and outdoors, with moderate alkalinity.

It can also be applied in new or repainted walls that can present problems of alkalinity. If you have concrete surfaces with less than 30 days of curing or highly alkaline as the base coat or similar materials, use the primary against high alkalinity, especially if the final paint color are intense or accent.